-
Who this checklist is for
-
Step 1: Define the fleet before you define the purchase
-
Step 2: Get the exact model and part number
-
Step 3: Build a TCO sheet before you request quotes
-
Step 4: Put Wi-Fi and network requirements in the RFP
-
Step 5: Price consumables and service, not just hardware
-
Step 6: Run a 30-day pilot with one department
-
Step 7: Standardize the rollout and document it
-
Common mistakes and warnings
Who this checklist is for
I'm a procurement manager at a 220-person services company. I've managed our print and device budget ($140,000 annually) for six years, negotiated with 20+ vendors, and documented every order in our cost tracking system. This checklist is for teams standardizing an office printer fleet: the kind of work where a lexmark-printer, a legacy lexmark dot matrix printer, and a specific model like the lexmark cs331dw laser printer 40n9020 all need to be evaluated with the same cost discipline. It is not for buying a bambu lab 3d printer, and it is not for modeling lease-versus-buy with a dividend calculator. Those are different buying decisions. I'm not a network security specialist, so I can't speak to firewall architecture. What I can tell you from a procurement perspective is how to put Wi-Fi requirements into the quote so you don't pay for rework later. There are 7 steps. Follow them in order.
Step 1: Define the fleet before you define the purchase
Start with a device inventory, not a vendor call. List every printer by location, model, monthly page volume, color vs. mono, duplex, scan/fax needs, and who owns the consumables budget. Include the old lexmark dot matrix printer in the back office if it still prints multi-part shipping forms. Don't assume it should be retired just because it's old. In one audit, we found a dot matrix unit supporting a warehouse process that no laser printer could replace without changing the form workflow.
Also decide what is out of scope. A bambu lab 3d printer does not belong in a printer fleet budget just because it is called a printer. Same with specialty label devices. Keep those requests in a separate capital request. The output of this step is a one-page fleet definition with a page-volume range and a clear list of must-have features.
Step 2: Get the exact model and part number
Vague quotes create fake savings. Ask for the exact model, part number, and configuration. For example, the lexmark cs331dw laser printer 40n9020 is a color laser model with specific paper handling and connectivity options. If a quote says Lexmark color laser and another says the exact SKU, you are not comparing the same thing. Check the current specifications on Lexmark's official site or support pages before you approve anything. Most buyers focus on per-unit pricing and completely miss consumable yield, warranty terms, and whether the network card or tray is included. The question everyone asks is what's your best price. The question they should ask is what exactly is in that price.
Step 3: Build a TCO sheet before you request quotes
Total cost of ownership (i.e., not just the unit price but all associated costs) is the only number that matters. Put these columns in your spreadsheet: base hardware, setup and install, shipping, network configuration, first set of consumables, service contract, expected maintenance parts, and disposal or lease return fees. Then add a 3-year and 5-year view. I built a cost calculator after getting burned on hidden fees twice. It takes 20 minutes to set up (thankfully) and saves hours of arguing later.
One warning: a dividend calculator is not a TCO calculator. I've seen a finance team try to compare lease versus buy using a dividend calculator because it has a discount rate field. It models payout streams, not service parts and page costs. Use a simple spreadsheet with your own assumptions and label them. They warned me about hidden fees with that vendor. I didn't listen. The cheap quote ended up costing 30% more than the expensive one once setup and freight were added.
Step 4: Put Wi-Fi and network requirements in the RFP
If the device will sit on Wi-Fi, write the requirement into the quote. Ask the vendor to confirm supported bands (2.4 GHz and 5 GHz), security protocols (WPA2/WPA3 Enterprise if required), DHCP reservation support, and whether the install includes driver deployment. Ask for their standard how to connect printer to wifi instructions for the exact model, not a generic sheet. According to Lexmark support (support.lexmark.com), firmware and control-panel menus vary by model; verify current instructions against the model's user guide.
Your checklist for this step:
- Confirm the SSID and VLAN the printer will use.
- Reserve an IP address before install day.
- Test sleep and wake reconnection, not just first connection.
- Get the driver package and a one-page user guide for new hires.
- Document the exact how to connect printer to wifi steps your team will use.
They warned me to document IP addresses. I didn't listen. One firmware update later, we spent a morning chasing a printer that had come back on a different address. That was a $800 mistake in staff time for one device. Now the IP and MAC go into the asset record on day one.
Step 5: Price consumables and service, not just hardware
Ask for cartridge yield under your actual print mix, not the marketing yield. Ask what happens when the fuser or maintenance kit reaches end of life. For a Lexmark printer, get the service SLA in writing: response time, parts included, and whether on-site repair is available in your area. Don't accept absolute uptime promises. No vendor can promise that. What you can price is a response-time commitment and a spare-device plan.
For older devices, including a lexmark dot matrix printer, check whether consumables and repair parts are still available. A low hardware price on a discontinued unit is not a saving if a $90 ribbon or a service call takes two weeks (unfortunately, the parts were discontinued). This is where the efficient process matters: standardizing consumables and service terms across the fleet cut our administrative time and reduced emergency orders.
Step 6: Run a 30-day pilot with one department
Pick the department with the highest page volume or the most annoying print workflow. Install one unit, connect it to Wi-Fi, and run a 30-day pilot. Check output quality on your real documents, scan-to-email reliability, duplex speed, and what users actually do when the printer is down. Track meter readings weekly. Compare the meter to the vendor's estimate. If the estimate is off by more than 15%, ask for a revised TCO.
My experience is based on about 200 mid-range orders. If you're working with production print, specialty labels, or ultra-budget desktop units, your experience might differ. The pilot is not about being clever. It's about catching a bad assumption before you roll out 20 devices.
Step 7: Standardize the rollout and document it
Create one asset record per device: model, serial number, MAC address, IP, location, owner, consumables part numbers, warranty end date, and the exact how to connect printer to wifi steps for that model. Keep a current driver package in your software deployment tool. In Q2 2024, when we switched vendors, we cut setup time from 5 days to 2 days by using a standard checklist and a pre-configured network profile. The automated process eliminated the data entry errors we used to have. That is the efficiency argument: fewer manual steps, fewer mistakes, faster turnaround for the business.
Common mistakes and warnings
- Don't let a bambu lab 3d printer or a hobby device ride on the office printer budget. Separate the request and the approval path.
- Don't use a dividend calculator for lease versus buy. Use a TCO sheet with service and consumable costs.
- Don't ignore the legacy lexmark dot matrix printer until you've confirmed the business process behind it.
- Don't compare a lexmark cs331dw laser printer 40n9020 quote to a vague Lexmark color laser quote. Match the SKU.
- Don't accept free setup without asking what is excluded. Free setup often stops at the door.
- Don't publish Wi-Fi steps from memory. Verify them against the current Lexmark user guide for the exact model.
Pricing and availability change. Prices as of January 2025; verify current rates and specifications with Lexmark or your authorized reseller. Regulatory and network security requirements vary by organization; confirm with your IT and compliance teams before rollout.
Discuss this article with a workspace planner